Native Instruments - Kontrol S5 - Layout

FRONT & REAR PANELS

Kontrol S5 - Rear panel

36. MASTER OUT - RCA Alternative Un-Balanced Master Output. Connect your powered speakers or power amp here using RCA type cables. The level of this output is controlled by the MASTER VOL knob at the top panel
    
    
37. MASTER OUT BALANCED Balanced Master Output. Connect your powered speakers or power amp here using XLR type cables. The level of this output is controlled by the MASTER VOL knob at the top panel
    
    
38. BOOTH OUT Balanced Booth Output. Connect your Booth monitor speaker to this socket, using 1/4" TRS cables. The level of this output is controlled by the BOOTH VOL knob at the top panel
    
    
39. AUX INPUT. Connect an auxiliary media source using RCA cables. When the AUX button [15] is enabled from the top panel, the signal of this input will be directly routed to the Master Output of the S5.
    This input is also part of the USB Audio Interface and supports Live Input to a VirtualDJ Deck. See Advanced Setup.
    
    
40. MIC INPUT. Connect a Microphone using 1/4" plug. When the AUX button [15] is enabled from the top panel, the signal of this input will be directly routed to the Master Output of the S5.
    This input is also part of the USB Audio Interface and supports Microphone Input to a VirtualDJ Deck. See Advanced Setup.
    
    
41. USB. This USB connection sends and receives audio and control information from a connected computer.
    
    
42. POWER: Use the provided AC/DC power adapter to connect Kontrol S5 to a power outlet. Use the Power Switch to turn the unit on and off. Turn on S5 after all input devices have been connected and before you turn on amplifiers. Turn off amplifiers before you turn off the S5
    
    
    
    Kontrol S5 - Front panel
    
    
43. HEADPHONES SOCKET. Connect your headphones using a 1/4" or 1/8" plug to this output for cueing and mix monitoring. The level of this output is controlled from the top panel
    
    

Advanced Setup